outline
#######

* github [1]_
* 官网 [2]_

使用
====

Install Outline
---------------

.. note:: 这部分在server端执行

* Install Docker::
  
    $ sudo curl -sS https://get.docker.com/ | sh

* Install and Configure Outline::
  
    $ sudo bash -c "$(wget -qO- https://raw.githubusercontent.com/Jigsaw-Code/outline-server/master/src/server_manager/install_scripts/install_server.sh)"

.. image:: https://img.zhaoweiguo.com/knowledge/images/fanqiangs/outline_install1.png

.. note:: 注意1: 记住类似{"apiUrl":"https://52.88.xxx.xxx:13899/9Z7rw...xxxxx","certSha256":"0615...A67C9A"}；注意2: 防火墙打开下面2个端口: 2.1 Management port 13899, for TCP, 2.2 Access key port 59170, for TCP and UDP


Install Outline Manager
-----------------------

从官网下载Outline Manager，打开

.. image:: https://img.zhaoweiguo.com/knowledge/images/fanqiangs/outline_install2.png

.. note:: 这儿要把前面记住的{"apiUrl"...}拷贝过来点击完成，后面就能自己明白了


Install Outline Client
----------------------

从官网下载Outline Client,使用就好了




.. [1] https://github.com/Jigsaw-Code
.. [2] https://getoutline.org/zh-CN/home